Optocomb

XTIA is the 1st company to bring the Optocomb technology to the industrial application level.


 

01What is the Optocomb?

More

023D scanning with Optocombs

More

01 WHAT IS THE OPTOCOMB?

Optocomb, the 2005 Nobel prize in Physics


Principle of the Optocomb leveraged by XTIA

The optical frequency comb (Optocomb) is said to be the world’s most accurate ruler for the measurement of both frequency and time. It is a special type of laser made of sharp and evenly spaced spectral lines resembling the teeth of a comb. The Optocomb concept was discovered in 1993 by Dr Kourogi, currently Director and Honorary Fellow at XTIA. While pursuing his work as a leading researcher in optical comb technology, Dr Kourogi contributed to the research of John Hall and Theodor Hänsch, who were awarded the 2005 Nobel Prize in Physics, in which the development of the optical frequency comb played a major role. The Optocomb is a special kind of light that has the properties of both a monochromatic laser and polychromatic white-light. Therefore, it has the following characteristics:

  • It contains light at many frequencies.
  • The light of each frequency is a laser with a narrow spectral width
  • The frequency intervals between each laser line are all the same
  • The phase of each laser frequency is aligned.

In the time domain, the waveform of the Optocomb is a periodic train of sharp pulses with individual widths shorter than 1 picosecond, and an interval of several tens of picoseconds, as shown in the figure above. Dr Kourogi paid attention to these properties of the Optocomb and thought that if it could measure time with high precision, there was a possibility of applying it to high-precision distance measurement and 3D scanning.

Back to top

 

02 OPTOCOMB-BASED 3D METROLOGY

Pushing Optocombs to the industrial application level


The simplest method of measuring distances using pulsed waves is the “time-of-flight” method. The distance to an object is determined by measuring the time it takes for a laser pulse to travel to the target object and back to its origin after reflection. In general, this method lacks accuracy. Indeed, in order to accurately measure a difference in distances ranging between 1 and 10 micrometers with a normal laser, one would need to measure the time-of-flight difference at the femtosecond scale. Detectors with such time precision levels however do not exist and instruments using the time-of-flight method can not reach the micrometer accuracy level.

By contrast, Dr Kourogi et al. developed a time-of-flight technique that rely on the multiple lasing frequencies of Optocombs to drastically improve this accuracy. Using two Optocombs serving respectively as a reference and a probe, and knowing the phase difference between all teeth of the combs, it is possible to expand the time-scale needed to measure the time-of-flight difference by a factor 50,000. As a result the time needed to measure micrometer distances is not at the femtosecond level any more but orders of magnitude longer, at the nanosecond level. Such a time-scale is compatible with commercially available detectors and the intrinsic features of Optocombs thus allow for measurements at the micrometer accuracy level.

To extend this core technology to high-accuracy and high-speed 3D scanning, XTIA then carried out developments in a large range of technologies, including Optocomb lasers, optical systems, electronic circuits, mechanical design, and software. In 2016, XTIA finally became the 1st company in the world to successfully bring the Optocomb technology to the industrial application level. As a result, XTIA is now providing Optocomb-based 3D scanners and 3D inspection systems to the manufacturing industry.

For more information about our innovative technological solutions, please refer to our Technology page.

Back to top